月河路店:杭州市月河路888号
联系电话:0571-87654321
联系人:徐小姐
解放路店:杭州市解放路888号
联系电话:0571-87654322
联系人:王小姐
加盟热线:0571-65887799
 
 
客户点评
 
点评详情
发布于:2017-1-10 07:53:30  访问:282 次 回复:0 篇
版主管理 | 推荐 | 删除 | 删除并扣分
Removing A Fitted Car Stereo Is Not A Hardcore Task
I`ve encounter a lot of car stereo systems over the previous 10 years or so. Everyone has their own opinion of what is right and wrong when wiring up a system, but simply as it works does not make it right. If appropriate, consistently use the harnesses. The aftermarket wiring harness will often require the guesswork out of the setup. These harnesses attach to the car `s factory wiring harness and offers you a colour coded installation. You simply attach, etc. that are reddish to reddish, yellowish to yellow
It is possible to try to look on the web for the wiring colours, but good luck. They`ll say the "typical" wire colours, but chances are it is going to differ. You can attempt two techniques to discover the proper wires. Clip the rest of the wires from the factory harness. You can analyze the speakers with a great 9 volt battery to determine which loudspeakers are which. Two wires connected to exactly the same speaker will make it pop. Note which loudspeaker makes the pop and attach it in the head unit to that loudspeakers wiring. Make sure that the cables would be the right polarity and I prefer to turn the unit on. A reverse wired speaker is not going to have as great a sound as a correctly wired one. Continue the technique until each of the speakers are connected.
Starting along with your digital multimeter, locate the power sources in the harness. One source will probably be continuous 12 volts, the other is going to function as the ACC (ignition) 12 volts. These two will go from the harness of the aftermarket head unit with the red and yellow wires. They are labeled accordingly. Plenty of head units include a connector for this already attached to the ground wire. Fix these in place with a few solder and shrink tube. Slip the shrink tubing over among the cables to be connected and move it out of the way. Join the wires and dab on just a little solder on the cables. Let cool and after that slide the heat shrink tubing within the connection.
Car stereos are installed in cars to make the driving pleasurable and cozy. For most of the people now a car stereo is a vital element of the automobile. They are positioned at the heart of the auto audio system and therefore are shaped and fitted to match the interiors of the car.
There are essentially two or one trim pieces that encircle the face of the stereo. Also to remove it the screws which can be usually hidden from ordinary view have to be detached. Infact, there are some hidden clips which need to be cared for while removing the trimming. In this instance, removal tools can be used. We should remove the screws or bolts, now once the trims are removed. The stereo will skid out from the dashboard, when they too are removed.
Now, it might occasionally happen that rather than using the factory installed car stereo year in, year out, folks might want to use an improved quality system. If you loved this short article and you want to receive more details with regards to BMW Autoradio Einbauset kindly visit our web site. But lack of knowledge about the precise methods for removing an installed car stereo can prove to be a hindrance. Nevertheless, in this instance it should be mentioned because the method is specialized, that though removing an installed car stereo isn`t a demanding job caution is needed by it.
共0篇回复 每页10篇 页次:1/1
共0篇回复 每页10篇 页次:1/1
我要回复
回复内容
验 证 码
看不清?更换一张
匿名发表 
当前位置
脚注信息
版权所有 Copyright(C)2014-2018 人胎盘组织液-复兴药业
复兴药业联系电话:010-68234621